Product Info Rainwater Barrier Height Adjustment with Ground Screws SmartBase PLUS Optimal Solution for Slope Unlike the SmartBase foundation, the patented SmartBase PLUS system includes ground screws instead of adjustable feet. These are screwed directly into the ground and can compensate slopes of up to 15 cm. For this, the soil should be compact and free of large stones and roots. Time of Assembly: 2 - 4 hours for two (depending on workmanship and size) Tools*: hammer drill, drill bit Ø 40 x 600 mm, spirit level, drill, open-end spanner SW13 and SW24, shovel. 1. 2. 3. ADVANTAGES • Little excavation • Gravel base is not necessary • Compensation of unevenness through ground screws • Easy to remove if necessary • Precisely fitted to all Biohort tool sheds, the Equipment Locker and the MiniGarage • Storm proof • Load bearing capacity of max. 200 kg/m 2 Standard Equipment: • Aluminium floor panels with grooved surface • Specially designed foundation frame • Galvanised ground screws • Multi-adjustable mounting plates • Including manual screw-in driver • Integrated water barrier to protect against water ingress Floor frame and floor plates are no longer necessary! 4. 5. 1. Prepare Assembly Site: Remove earth with a spade to a depth of approx. 10 cm and mark the position of the ground screw holes. 2. Screw in Ground Screws: Pre-drill with a hammer drill and insert the ground screws with the tool provided. * not included in the delivery 6. 3. Attach the Mounting Plates: Connect the mounting plates onto the ground screws and level with a spirit level. 4., 5., 6. Attach the Frame and Aluminium Floor Panels: Position the frame and joists and fasten them securely with the mounting hardware. Insert and fix the aluminium floor boards. Aluminium Floor Board Foundation Frame Mounting Plates Ground Screws
Halið niður PDF-skjali